Massey Ferguson, Tractors

Massey Ferguson MF 360 Turbo Features

Massey Ferguson MF 360 Turbo Features:

Massey Ferguson 360 Turbo tractor is the new in the market with high capacity. This tractor has oil cooler. It has best multiple and easy brake system. This new technology tractor distinguished its features due to its new brand features and it is easy to operate. Its multi dimension increase the land productivity level and also increase the profit margin. This new tractor is increasing its name in the market due to its high technical assistance.

PERFORMANCE FRONT AXLE
Engine power @ 2,250 rpm 60 hp* Axle Type Box Section, Adjustable
Torgue at 1,400 rpm 212 Nm
 PTO power at rated engine speed 48 hp** REAR AXLE AND BRAKES
* Certified to BS AU 141a Brake Type Oil immersed, multi-disc
** Manufacturer’s estimate Actuation Mechanical
Axle Type Straddle Axle with Epicyclic Reduction Unit
ENGINE Parking Brake Hand lever operated
Make /Type Diesel/ T 3.1524 Differental lock Mechanical
No. of cylinders 3
Injuction Direct INSTRUMENTATION
Bore 91.4 mm Gauges Tachometer, Hourmeter, Fuel level, Battery condition & Water temperature
Stroke 127 mm Warming lights Direction indicators, Battery Charge, Headlight main beam Low engine oil pressure, Brake light & Auxiliary Socket
Capacity (liters) 2.5 litre
Compression ratio 16.5:1 TYRES
Starting aid Thermostar Front 7.50-16 (6PR)
Throttle Control Hand and foot Rear 14.9/13-28 (6PR)
Cooling Water
Air Cleaner Type Oil bath TRACK ADJUSTMENT
Air Pre-Cleaner Over bonnet, Air swirl Front axle 1,275-1,884 mm
Fuel filter Dual, High capacity Rear axle 1,438-2,125 mm
Exaust Vertical
Oil Cooler Water Cooled WEIGHT AND DIMENSIONS
Weight (with 7.50-16 front & 14.9 / 13-28 rear wheel and with full Fuel, oil & water) .
ELECTRICS Gross Weight (Approx) 2,010 kg
Voltage 12V, negative earth
Battery 118 Ah Dimensions .
Starter 2.2 kW Wheel base 2,032 mm
Alternator 32 Amp. Overall length 3,353 mm
Width minimum 1,890 mm
CLUTCH
Type Dual Clutch Height .
Diameter 305×254 mm Over Exhaust 2,236 mm
Over Steering Wheel 1,499 mm
TRANSMISSION
Type Sliding spur Turning Circle .
Number of gears 8 forward, 2 reverse With brakes 5,867 mm
Road speed at 2,250 engine rpm with 14.9 / 13 – 28 rear tyres . Without brakes 6,833 mm
Gear Speed (kph)
Forward 1 (first low) 2.6 Ground Clearance .
Forward 2 3.8 Ground Clearance Under gear box 400 mm
Forward 3 5.2
Forward 4 7 CAPACITIES
Forward 5 ( first high) 10.4 Fuel Tank 47.5 L
Forward 6 15.2 Engine sump 6.8 L
Forward 7 20.8 Cooling system 11.7 L
Forward 8 28 Hydraulic system 36.0 L
Reverse 1 (Low) 3.5 Steering 2.0 L
Reverse 2 (High) 14.1 Oil bath air cleaner 0.5 L
HYDRAULICS POWER TAKE OFF
Functions Draft Control, Position Control, Response Control, Constant Pumping Type Live
Pump Type Reciprocating Ferguson Engine speed @ 540 PTO rpm 1,789 rpm
Oil Flow 16 litre/min Shaft diameter 35 mm
Pressure 21 MPa at normal operating temperature No. of splines 6
lift capacity with lower links horizontal 2,145 kg
Lower links Cat. I & II with interchangeable balls STEERING
Steering Hydrostatic

STANDARD EQUIPMENT
Weight frame without weights, Standard tool box with set of tools, Top link, Top link end Cat-I, Cat & II balls, Check Chains, Spring suspension seat, Flat top fenders, Operator’s & Service manual.
OPTIONAL EQUIPMENT
Front end weight, Swinging drawbar, Sun Conopy, Pintle Hook and 9 Hole drawbar.

Comments are Closed

Theme by Anders Norén